If you print stickers, decals, or any shape that gets cut out after printing, you need a contour cutline. It’s the vector path your cutter follows around the design. Get it right and every piece comes out clean. Get it slightly wrong and every sticker ships with a thin white racing stripe down one side.
Most designers make cutlines in Illustrator or let the RIP guess at them. Contour cutlines software lets you build them right where your artwork already lives, then export a file your print-and-cut workflow can use. (Scissors are technically contour cutline software too, but they don’t scale well.)
Quick answer: Contour cutlines software creates a vector cut path around your artwork, usually on a spot color named CutContour, so your RIP knows to cut that line instead of printing it. Good cutline software builds the path automatically from your art, adds bleed so small misalignments don’t show, and exports in a format your RIP and cutter can read.
A contour cutline is a vector path that follows the outside shape of your design. When you send the file to a print-and-cut device, the RIP prints the artwork and the cutter follows the path.
Two things make a cutline work:
| Method | How it works | Trade-offs |
|---|---|---|
| Illustrator | Trace or offset the art, then assign a CutContour spot color | Very precise, but means leaving Photoshop and learning another app |
| RIP auto-contour | The RIP generates a cut path when you load the file | Fast, but you get less control over the shape and bleed |
| Manual paths in Photoshop | Draw the path with the Pen tool and set it up by hand | Full control, but slow, and exporting it correctly is tricky |
| Photoshop cutline plugin | Builds the cut path from your art and exports a RIP-ready file | Fast and stays in Photoshop; very intricate art may still need manual paths |
White edges on the finished piece
The cut landed slightly outside the printed area. Add bleed so the artwork extends past the cutline.
The RIP printed the cutline instead of cutting it
The path isn’t on the spot color your RIP expects, or the spot color name doesn’t match exactly. Check that it’s set to CutContour, or whatever name your RIP uses.
Jagged or wobbly cuts
The path has too many points or was traced from soft, low-resolution edges. Start from clean, high-resolution art.
Auto-trace picks up specks and halos
Semi-transparent pixels and stray specks around the art can confuse automatic tracing. Clean the edges before you create the cut path.
Cuts through thin or detailed parts
Very intricate art can produce cut paths that are too complex for the cutter. Simplify the shape, or draw that path by hand.
Lightning Cutlines is a Photoshop plugin that creates and exports true vector contour cutlines without opening Illustrator.
It’s a good fit for stickers, decals, Big Heads, and most raster artwork. Automatic tracing is less accurate on highly detailed images, so for very intricate shapes you can draw the path manually or use Illustrator.
Lightning Cutlines requires Photoshop 23.3 or later and is available as a monthly or yearly subscription you can cancel anytime.
What is contour cutlines software?
Software that creates a vector cut path around your artwork and assigns it to a spot color, usually CutContour, so a print-and-cut RIP knows where to cut.
Can Photoshop make cut lines?
Photoshop can draw paths, but setting them up and exporting them in a format your RIP reads as a cut is the hard part. Photoshop cannot do this out of the box! The Lightning Cutlines plugin handles that step for you.
Are there other Photoshop plug-ins to create and export cut lines?
As far as we know…NO. Lightning Cutlines is currently the only option to create and export contour cutlines from within Photoshop. Usually a vector program like Adobe Illustrator is needed to do it, but this changes that and keeps things easy and all within Photoshop.
Do I need Illustrator to make cutlines?
No. A Photoshop cutline plugin (Lightning Cutlines) can create and export the cut path. Illustrator is still useful for very intricate shapes.
What is the easiest software for creating contour cutlines for a hobbyist?
If you have Photoshop, we believe that Lightning Cutlines is the fastest and easiest way to create cutlines. It makes it super simple. Just a few clicks and you can have cutlines, bleed, registration dots, all created and exported from within the Photoshop interface you are used to using.
What is CutContour?
CutContour is the common name for the spot color that tells many RIPs a path should be cut instead of printed.
What is bleed, and why does it matter for cutlines?
Bleed extends the artwork slightly past the cut path. Print and cut alignment is never perfect, so bleed keeps small shifts from leaving a white edge.
What is a perf cut?
A perforated cut, a dotted cut that leaves the piece partly attached so it can be torn out later. Lightning Cutlines exports these on a PerfCutContour spot color.
Which RIPs work with Lightning Cutlines?
It’s compatible with Roland VersaWorks, Onyx, S365, and others that read CutContour spot colors.
Good cutlines come down to a clean vector path, the right spot color, and enough bleed. You can build all of that by hand, or let contour cutlines software do it while you stay in the app where your art already lives.
Get Lightning Cutlines and start exporting RIP-ready cut paths straight from Photoshop.
Lightning Plugins is proudly powered by WordPress